clutch

Hi, I own a brand new CBR650R E-Clutch and I am experiencing a recurring technical fault that has happened dozens of times. The issue occurs specifically when riding down long descents or traveling from high-altitude areas (above 600 meters) down to sea level. During the ride, usually between...

So I love the bike but I don't push it too hard. The engine revs to 12000 but mine has never ben past 8000, it lacks a bit of low speed torque compared to my old MT07 but it so smooth I can forgive it. My question is do I need to push it all the way to its rev limit occasionally to remind it...

I was wondering what is your driving style/technique? Using the original levers. What do you think is the correct way? I use 2/2. I tried to check if there was a poll before about this but couldn't find it. If there is, apologies. m(_ _)m joaoamaral (GaijinRider - youtube.com/@gaijinrider)

Hello everyone, I’m starting to lose my mind with my CBR. It was running perfectly before. I only removed the clutch cover, the clutch itself, and the fairings for maintenance, and since then it absolutely refuses to start. The starter motor turns, fuel is getting in, but there is no spark at...

Hello, I picked up my 2014 CB650F 30k miles, 1 owner FSH (had early valve check) yesterday and having a blast. I’ve noticed some chatter at low rpm (1-2k) and when I’m engaging the biting point on clutch. Want to post here as I presume it’s normal engine noise but I’m not used to the bikes...

Hey everyone, looking for some advice. My clutch went completely loose while riding — the lever had zero tension and wouldn’t engage the clutch at all. Here’s what I’ve already done: Pulled the clutch apart all the way down to the basket Plates, basket, and hub all looked good...

Hello! I've been riding my 2015 Cbr650F for a good bit now, nothing was wrong with it, or so I thought. One day leaving the gym about 5 months ago, I dropped the bike, on its left side. Replaced everything as for fairings, my sliders save everything. The clutch as been feeling weird ever...

Bike has just over 1500 miles oil change at 600 miles with pro Honda GN4. When I get on the bike hard can feel it slightly slipping from 3rd gear and up. I have lots of play in the clutch so I’m just looking for advice should I bleed the clutch?

Hey, so I have a CB650R E-Clutch from 2024 and I just installed a full akaprovic exhaust system and after that instalation the clutch doesnt seem to engage properly (i use quickshifter) the bike from 1st to 2nd works just fine, 2nd gear to 3rd after 6k rpm takes a little to engage the clutch...

Hi everyone to all CBR650R (and CB650R) owners! I'm writing here to ask for advice and, hopefully, find a solution to a small issue I'm having. I own a 2024 Honda CBR650R E-Clutch in the "Matt Gunpowder Black Metallic" color. Unfortunately, following a minor incident, I have an annoying chip...

Has anyone here derestricted/and dyno tuned their lams Cbr650r e clutch in Australia/ Sydney specifically if so, was it all smooth and perfect after? As a tuner here in Sydney has told me after deresteiction the e clutch has ‘slippage’ due to ‘too much power’ which just seems incorrect to me...

I’ve just bought this used cb650r and I absolutely love it. It’s my favorite motorcycle and it’s my baby. But there some things that I want to make sure. 1. Is the buzzing sound from chain normal? 2. How do I know if there’s transmission problem with my cb650r 2021 3. Signs of clutch problem...

Does anyone know if EBC makes a clutch removal tool for the 2023 CBR650R? Tried the CT014 and it doesn't work.. https://www.ebcbrakes.com/products/ebc-clutch-installation-and-removal-tools/

Possible swap clutch from 2019 CBR650R (the first year they added assist/slipper clutch) I only saw one post from way back on this. But no followup. With all the pre-2019 CBR650's out there was hoping more people knew of any problems after installing assist/slipper clutch from 2019 CBR650R to...

Honda CB650R 2023, 1000km mileage. Like many of us I faced a false neutrals problem. However, I've never heard anyone experiencing it like I did. Here are detailed steps of what's happening: 1) I catch a false neutral when switching gears (usually from 1st to 2nd or from 2nd to 3rd) 2) The...

Brand new to these forums and hoping I can get a straightforward answer. I have a 2016 CBR650F and I’m looking to replace my clutch cover and have my sights set on a clear clutch cover as I think that it’s pretty cool to be able to see it spin around. My question is are CBR650R clutch covers...

Brand new to these forums and hoping I can get a straightforward answer. I have a 2016 CBR650F and I’m looking to replace my clutch cover and have my sights set on a clear clutch cover as I think that it’s pretty cool to be able to see it spin around. My question is are CBR650R clutch covers...

Hello, I need to replace clutch in my CB650F after 17.000 km. I decided to buy EBC SRK 149 Clutch Kit with springs. Do you have some experience with this brand? Maybe some advices what to pay atentieon to? Do I need to replace a cover gasket? I'm not mechanic but I hope I can do it myself ;)...

Hello everyone. Just wondering if anyone else is experiencing delays in the UK on delivery of new 2024 Eclutch CB650Rs?

大家好，我来自中国，英文一般，所以用翻译器沟通。我改装了CBR650R的离合手柄，现在感觉离合器不容易握。我调整了离合器行程，但情况没有改善。我该怎么办？我需要更换离合器线吗？ 或者只是调整电缆的位置？（似乎位置不太好） Translation: Hello, everyone. I'm from China. My English is average, so I use a translator to communicate. I modified the clutch handle of the CBR650R, and now I feel that the clutch...